With washing machines, power showers and central heating systems needing water, old supplies (often Lead) do not provide an adequate flow due to a smaller bore. This poor pressure can be increased through the installation of a greater internal diameter pipe of 25mm.
As a standard regulation we install a minimum of 25mm, though we are able to install 32mm or above! We are fully accredited and self-certified, which means we are trusted to install our pipework to regulation standards.
Check out our testimonials to see how we have improved pressure across properties!
Get in touch
Call us on 0151 605 1469 and tell us about your problem. Don’t worry, won't ‘hard sell’, we’ll just ask a few basic questions about the job.
Get an estimate
We can usually give you an estimate without coming out to you – we use Google Earth and 3D imaging to see what problem is.
Get the job done
If you’re happy with the estimate, we will arrange a site visit. We will have seen problems like yours before and successfully fixed them
We’ll take care of all the necessary applications and permits if required, get the job done quickly and efficiently, and leave everything clean and tidy.
Frequently Asked Questions
Is the external pipe work the Water Board’s responsibility?
Afraid not, the underground water pipe from the valve in the pavement leading to and entering your house is your responsibility. When you bought your house, you bought the pipe!
How long will I be without water?
Usually 15 minutes.
What about mess inside and outside my house?
All excavations are backfilled and reinstated. Our operatives clean up after each job as part of a day’s work and take their boots off to work inside.
What do I need to do regarding the Water Authority?
Nothing, we make the applications and acquire certification on your behalf.
Can Mole Group improve my mains water pressure?
We can’t guarantee an improvement in mains pressure without coming out to site, but particularly where we replace lead pipes with plastic we invariably see improvements in water pressure and flow rate, sometimes by as much as 500%.
Where To Find Us
Mole HQ, Wirral
Unit 9, Tarran Way South, Tarran Industrial Estate, Moreton, Wirral, CH46 4TP
Unit 3 Ayton Workshops, 25 Raby Cross, Commercial Road, Byker, NE6 2FF
33 Finsbury Square, London, EC2A 1AD
6 South Wing, Mansion House, Devington, Exminster, Devon, EX6 8UJ
Fronfellen House, Corris, Machynlleth, SY20 9TF